K705 GNSS OEM Board
Introduction*Replacement Product with same size & pin definition: K803 Card Version (50×40mm). The K705 is a full-constellation triple-frequency GNSS OEM board featuring superior performance and c
- Baud rate： 921600
Introduction |
| *Replacement Product with same size & pin definition: K803 Card Version (50×40mm). The K705 is a full-constellation triple-frequency GNSS OEM board featuring superior performance and compact design. |
| GPS L1/L2/L5, BeiDou B1/B2/B3, GLONASS L1/L2, Galileo E1/E5a/E5b, SBAS, QZSS, IRNSS |
| BeiDou Global Signal B1C, B2a |
| Fully EMI Shielded Module |
| Signal Acquisition Acceleration Module |
| Compact Design for Mobile Applications |
| Support PPP |
| DP-Filter Smooth Function |
| Serial, USB, CAN and Ethernet Interfacing |
| LVCMOS ports | 6 ports, baud rates up to 921,600 bps |
| USB port | 1 port |
| LAN Ethernet port | 1 port, supports HTTP, TCP and Ntrip protocol |
| CAN Bus | 1 (Reserved) |
| PPS output | 1 Pulse Per Second (PPS) output |
| Event Markers input | 2 inputs |
| LED indicators | 3 indicators show the working status |
| External Oscillator input | Support |
| Correction data I/O | RTCM 2.X, 3.X, CMR(GPS only), CMR+(GPS only) |
| Position data output | - ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK |
| -ComNav Binary | |
| - BINEX Data: 0x00, 0x01-01, 0x01-02, 0x01-05, 0x7d-00, 0x7e-00, 0x7f-05 | |
| - Position data output: 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20Hz |
| Size (L x W x H) | 50mm × 40mm × 9mm |
| I/O interface | 2 × 22 pin male connector, pin pitch 1.27mm |
| Antenna connector | 1 × MMCX female, 50 Ω |
| Weight | 22g |
| Humidity | 95% no condensation |
| Operating temperature | -40 °C to + 80 °C |
| Storage temperature | -55 °C to + 95 °C |
| Input voltage | +3.3 V ~ +5.5 VDC |
| Power consumption | 1.3 W (typical) |
| LVCMOS ports | 6 ports, baud rates up to 921,600 bps |
| USB port | 1 port |
| LAN Ethernet port | 1 port, supports HTTP, TCP and Ntrip protocol |
| CAN Bus | 1 (Reserved) |
| PPS output | 1 Pulse Per Second (PPS) output |
| Event Markers input | 2 inputs |
| LED indicators | 3 indicators show the working status |
| External Oscillator input | Support |
| Correction data I/O | RTCM 2.X, 3.X, CMR(GPS only), CMR+(GPS only) |
| Position data output | - ASCII: NMEA-0183 GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK |
| - ComNav Binary | |
| - BINEX Data: 0x00, 0x01-01, 0x01-02, 0x01-05, 0x7d-00, 0x7e-00, 0x7f-05 | |
| - Position data output: 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20Hz |